Description

UC 105 is a one-part moisture cured, clear, aliphatic polyurethane primer for use as supplied. It is clear, non-yellowing and is specifically formulated to improve the adhesion of polyurethane and poxy compounds onto ceramics, masonry, natural stone, and brick substrates.

Application

Transfer a portion of UC 105 into a clean container.

Tightly seal the original container to prevent the contents gelling.

Apply a thin coat of primer by brush and allow the solvent to evaporate before applying coating or sealant.

Once the primer loses its tackiness, re-prime.

Surface Preparation

The correct preparation of the surfaces is critical.

All surfaces should be clean, sound, and dry, and all laitance or surface contamination should be removed by wire brushing, grinding or grit blasting.

Vacuum or blow with compressed air to ensure total removal of dust.

Product Application

As a primer coat under UC epoxy and polyurethane compounds, when used in paving, curtain walls, expansion joints in tiled areas, and between pre-cast units.

Cleaning

Clean brushes after use with UC 901. Once cured the primer may only be removed mechanically.

Safety

Contains organic solvents.

Flammable

Do not use in confined spaces. Ensure adequate ventilation and the absence of any ignition source. Wear protective clothing. In case of eye contact wash well with water and obtain medical advice.